Shock mount studs anchor the shock to the chassis or axle, taking every compression and rebound load the suspension generates. A stud that fails or loosens lets the shock move, changing damping behavior instantly. Locking nut designs resist the vibration that walks ordinary hardware loose.
Titanium options cut weight at a mounting point that sees constant cycling.
Shock stud kits include two studs with large support cones and two nylon locking half-nuts to mount shock to most rear torsion arms. Studs and nuts weigh less than 50 grams.
Details:
- Material: Titanium
- Finish: Natural
- Thread: 1/2-20
- Product Length: 2 Inch
- Vehicle Type: Sprint Car
- Product Weight: Less Than 50 Gram
- Hardware Included: Four Locking Nuts / Two Studs
- Sold As: Kit
Specifications
| Part Number | TIP1170 |
|---|---|
| Product Type | Shock Fasteners |
| Intended Purpose | Mount Stud |
| Bolt/Stud/Pin | Stud |
| Fastener 1 Length | 2 in |
| Thread Side 1 | 1/2-20 in |
| Head/Nut Style | Hex |
| Nuts Included | Yes |
| Standard / Lock Nuts | Lock |
| Nut Quantity | 4 |
| Material | Titanium |
| Color | Natural |
| Finish | Natural |
| Quantity | Pair |
| Country of Origin | USA |
| Shipping Weight | 0.36 lb |
| Shipping Dimensions (L x W x H) | 6.85 x 4 x 1.15 in |
⚠ CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Product Information Sheet
