TIP5652 Throttle Disconnect Quick Release Ball Joint 10-32 in Male Thread Aluminum Blk Anodized MSRP: Was: Now: $14.99
TIP5656 Rod End Spherical 3/16 in Bore 10-32 in Right Hand Male Thread Aluminum Blk Anodized MSRP: Was: Now: $10.99
TIP5657 Rod End Spherical 3/16 in Bore 10-32 in Left Hand Male Thread Aluminum Blk Anodized MSRP: Was: Now: $10.99
TIP5638 Throttle Linkage 17 in Long Rod 10-32 in Thread Aluminum Blk Anodized Throttle linkage translates pedal movement into injector barrel position, so its precision is what the driver feels as throttle response. Slop or binding here costs the fine control needed to get off... MSRP: Was: Now: $17.99
TIP5640 Throttle Linkage 18 in Long Rod 10-32 in Thread Aluminum Blk Anodized Throttle linkage translates pedal movement into injector barrel position, so its precision is what the driver feels as throttle response. Slop or binding here costs the fine control needed to get off... MSRP: Was: Now: $17.99
TIP5650 Throttle Disconnect A throttle disconnect lets you separate the throttle linkage quickly for engine removal or service without disturbing the adjustment. Undoing a linkage by hand every time costs time and loses your... MSRP: Was: Now: $14.99
TIP5652 Throttle Disconnect Quick Release Ball Joint 10-32 in Male Thread Aluminum Blk Anodized A throttle disconnect lets you separate the throttle linkage quickly for engine removal or service without disturbing the adjustment. Undoing a linkage by hand every time costs time and loses your... MSRP: Was: Now: $14.99
TIP5656 Rod End Spherical 3/16 in Bore 10-32 in Right Hand Male Thread Aluminum Blk Anodized Rod ends are the pivot at every end of every suspension and steering link, which makes them the most numerous wear point on the car. A worn rod end introduces slop that shows up as vague steering and... MSRP: Was: Now: $10.99
TIP5657 Rod End Spherical 3/16 in Bore 10-32 in Left Hand Male Thread Aluminum Blk Anodized Rod ends are the pivot at every end of every suspension and steering link, which makes them the most numerous wear point on the car. A worn rod end introduces slop that shows up as vague steering and... MSRP: Was: Now: $10.99
TIP5664 Jam Nut 10-32 in Right Hand Thread Aluminum Blk Anodized Set of 4 Jam nuts lock rod ends and threaded links at the length you set, and every one of them is what stops a suspension adjustment from walking loose over a race. A single nut that backs off changes... MSRP: Was: Now: $7.99
TIP5666 Jam Nut 10-32 in Left Hand Thread Aluminum Blk Anodized Set of 4 Jam nuts lock rod ends and threaded links at the length you set, and every one of them is what stops a suspension adjustment from walking loose over a race. A single nut that backs off changes... MSRP: Was: Now: $7.99
TIP8004 Fuel Cell Mount Clamp-On Fuel cell mounts anchor the cell to the chassis so a full load of fuel stays put through impacts and cornering loads. This is a safety part as much as a mounting part. Clamp-on and weld-on versions... MSRP: Was: Now: $49.99
TIP8008 Weld-On Fuel Cell Mount Pair Fuel cell mounts anchor the cell to the chassis so a full load of fuel stays put through impacts and cornering loads. This is a safety part as much as a mounting part. Clamp-on and weld-on versions... MSRP: Was: Now: $15.99
TIP8535 Quick Wrench For -6 Fittings AN wrenches are shaped to grip the flats of an AN fitting without rounding or marring the anodized finish, which matters because those fittings get removed and reinstalled constantly. Using an... MSRP: Was: Now: $33.99
