The steering arm converts drag link movement into wheel angle, setting your steering ratio and Ackerman geometry. Because it hangs off the spindle, both strength and weight matter here. Billet aluminum construction resists the bending loads a rutted track puts into the front end while keeping unsprung mass low.
Correct mount and offset dimensions are what keep the front end responding the way the setup sheet intends.
Ti22 Front Steering Arms are built with 2024 aluminum for strength and durability. 3 Inch mount, 1 Inch offset with a 5-3/4 Inch split. Black or Plain finish.
Details:
- Material: Aluminum
- Finish: Clear Anodized
- Style: Combo
- Location: Driver Side
- Vehicle Type: Sprint Car
- Sold As: Kit
Specifications
| Part Number | TIP3025 |
|---|---|
| Product Type | Steering Arms |
| Type | Combo |
| Bolt Hole Center to Center 1 | 5-3/4 in |
| Tie Rod Centerline | 1 in |
| Passenger / Driver Side | Driver |
| Alloy | 2024 |
| Material | Aluminum |
| Color | Natural |
| Finish | Anodized |
| Quantity | Each |
| Country of Origin | USA |
| Shipping Weight | 1.255 lb |
| Shipping Dimensions (L x W x H) | 8.8 x 8.05 x 1.2 in |
⚠ CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Product Information Sheet
